Showing
61 - 80
of 258
, query time: 0.01s
61) Gilman
Format:
Image
Gilman from above U.S. Highway 24, showing entrance into the town. The main mine shaft is at left in the center of the photograph. There are no stairs up to the road for the bottom row of houses so this may be during their construction.
Format:
Image
View from the surface tram looking down toward Belden.
63) Tram at Belden
Format:
Image
Looking up the tram at Belden toward Gilman; railroad siding in foreground.
64) Jack Johnson
Format:
Image
Jack Johnson, surveyor, checking calculations at his desk. Survey crews worked both in the Gilman Mine and at Belden, as well as on the general property of New Jersey Zinc, Gilman.
Format:
Image
Underground machine shop at the Gilman Mine with John "Smiles" Doyle on the left and Bob Enzenroth on the right. An open forge is on the left.
Format:
Image
Frank Jones using one of the lathes to cut centers on the shaft of a bucket elevator tail pulley used in the Milling Department.
68) Tram at Belden
Format:
Image
Close up looking up the tram at Belden toward Gilman; supports at midfield.
69) Belden
Format:
Image
Looking down the Eagle River toward Belden. Railroad tracks in foreground; Gilman buildings are visible at the top.
72) Flotation area
Format:
Image
Floation area for the zinc ore at Gilman. Flotation tables were used to seperate the zinc and lead from the waste in the mining process. Further processing separated the lead and the zinc.
74) Adjusting valves
Format:
Image
Dick Sayers (left) and John Skinner discussing the adjustments to equipment. A good view of the headlamp attachment to the battery pack carried on one's belt.
75) Rail ore cars
Format:
Image
Ore cars full of ore lined up on the rails, waiting to go to the crushers.
76) Gilman
Format:
Image
Gilman taken from the other side of the Eagle River Canyon. The main mine shaft is at right of center.
77) Belden
Format:
Image
Facilities at Belden, some abandoned. Gilman is visible at the top of the cliff. Mine buildings are at right, midfield.
78) Repair shop
Format:
Image
More steel milling machiner in the repair shop. The lathe at center is approximately 20 feet long.
Format:
Image
Gilman taken from U.S. Highway 24 which curves around and continues at the upper left. The main shaft of the mine is at the far left.
80) Gilman
Format:
Image
Main entrance to Gilman, a company town of New Jersey Zinc Co., from Highway 24.