Archive Search Results
Showing
1 - 20
of 21
, query time: 0.01s
Format:
Image
Looking at Belden, at the bottom of the Eagle River Canyon, below Gilman, from the surface tram. The railroad siding was where chemicals were off loaded and ore was loaded into freight cars. The power plant sits across the Eagle River, accessible by a foot bridge. A group of men are gathered at the center of the photo.
2. Belden
4. Repair area
5. Belden
7. Machinery
10. Belden
13. Belden
15. Derailment
16. Belden
Format:
Image
The Belden processing and shipping area for the ore that was mined at Gilman Mine. The loading tippel is the first building on the left (white); next is the steam room and then the dryer.
Box cars are lined up on the tracks by the loading tippel. The box cars at the center of the photo are underneath the Ben Butler Mine.
17. Transportation
18. Cap lamp room
Format:
Image
Berniece Chadwick, Alberta Limatta, and Ella Burnett with Hawkeye and Jean Flaherty behind them in the cap lamp room. The belts visible on Berniece and Ella hold a battery pack on the back with a power cord attaching to the lamp. Each lamp had 2 filaments so that if one burned out, the power could be switched to the second.
19. Mantrip
Format:
Image
Loading up for transportation to lower levels in the mine. The 16-10 incline goes down to the 18 level (at one time it went all the way to the 24 level). Transporting people was called a mantrip.
In the front seat are Terry Pierson, Ella and Pete Burnett. Victor Pierson is standing at left in the yellow helmet.
20. Cap Lamp Room
Format:
Image
From left, Bill Burnett, Hawkeye (Gordon) Flaherty, and Ella Burnett are standing in front of cap lamp units at 16 level in the Gilman mine. Alberta Limatta is at far right.
The shaft house had a 2 cage lift system, taking miners between levels. It could work with one cage going up and the other down, or with just one isolated cage moving. Cap lamps were put on before going into the mine and returned upon coming out.